|Product Name:||10 Million Operation Times 24V DC Servo Motor Boom Parking Barrier Intelligent Barrier||Working Environment Temperature:||-40 ℃ ~ +85 ℃|
|Arm Type::||Straight, Folding, Fencing||Color::||Yellow, Orange, Grey-black|
|Operation Time:||0.3,0.6,0.9,2,4sec Run Speed Adjustable||Machine Case:||Varnished 2.0mm Steel Plate|
parking lot gate arms,
traffic barrier gate
10 Million Operation Times 24V DC Servo Motor Boom Parking Barrier Intelligent Barrier
Up/Down Speed Parameter Adjustments Instruction:
Parameter Name Explanation:
PA__00 parameter item
** _ Err: false alarm
Menu: menu key, switch in four parameters
L / R Arrow: Left and right movement keys, moves circularly, the corresponding characters flash
UP arrow: increase from 0 to 9, cycle key, add one for each pressing
ENTER: Enter key. Press ENTER at the currently displayed parameter to enter the specific parameter setting.
1d0000, 2d0000, 3d0000, 4d0000: Indicates that the current parameter is 0000, which can correspondingly
revise from the first to the fourth bit on the rightmost side.
Halfway return time parameters: PA__09 (range from 100 ~ 1500)
Up parameters: PA__10, PA__11 (range from 100 ~ 9999), PA__12 (range from 01 ~ 99),
Down parameters: PA__13, PA__14 (range from 100 ~ 9999), PA__15 (range from 01 ~ 99),
Down position parameters: PA__20 (range from 01 ~ 9999)
Up position parameter: PA__21 (range from 01 to 9999)
Resistance sensitivity: PA__23 (range from 10 to 99)
Boom level: PA__30 (range from 0 to 1)
|Medium octagon boom 3m,1sec (without adhesive tape)||1500||1650||1850||35||1550||1850||05|
|Medium octagon boom 3m,1sec (with adhesive tape)||1500||1650||1850||35||1400||1900||30|
|Large octagon boom 4.5m,2.5sec (without adhesive tape)||400||950||2800||35||750||3500||30|
|Large octagon boom 6m,4sec (with adhesive tape)||400||500||5500||25||400||5500||25|
|3m round boom,0.9sec||1500||1650||1750||25||1650||1750||15|
|2.5m round boom,0.6sec||1200||1350||1050||20||1250||1500||30|
|DZ-138 barrier gate||V06T||V09T|
|Max Boom Length and Diameter||2500mm, Ф75mm||3000mm, Ф75mm|
|Machine Case||Varnished 2.0mm steel plate||Varnished 2.0mm steel plate|
|Machine Case Size(W*D*H)||342*312*959mm||342*312*959mm|
|Operating Temperature Range℃||-45℃~+85℃||-45℃~+85℃|
|Driving Method||Servo motor||Servo motor|
|Remote Control Distance||≤100m (open, sunny weather)||≤100m (open, sunny weather)|
|Surface Treatment||Outdoor metal powder electrostatic spraying||Outdoor metal powder electrostatic spraying|
|Voltage(±10%)||100-240 volt||100-240 volt|
|Max Power Consumption(watt)||8||8|
|Control Voltage||24V DC/max.3000mA||24V DC/max.3000mA|
|Open Collector Output Number||2||2|
|Zero Level Reversal Relay Number||3||3|
|Operating Temperature Range℃||-45℃~+85℃||-45℃~+85℃|
Servo Motor Barrier Advantages:
|1. Gate automatically open when power off, no clutch design, no need human intervention. When power on, gate automatically reset, restore to the gate closing state, truly unattended, fire safety standards. If special requirement,manual operation is required when power off, operating arm open and close manually also can be realized by setting up control board DIP switch, which ensure that the system can be used at any time.|
|2. The use of Single Compression Balance Spring device, good regulation, no noise, indefatigable, not easy to break, safe and reliable.|
|3. A variety of input and output modes can be selected, normally open normally closed are optional.|
|4. Arm opening angle can be adjusted from 60 to 90 degrees, 10 degrees resolution, suitable for eaves prominent place to install.|
|5. Closing speed can be adjusted.|
|6. Barrier gate up &down signal relay switch output.|
|7. Barrier gate running state: OK signal output indicating that the gate is working properly.|
|8. Barrier gate operation abnormal alarm signal output.|
|9. R&G Traffic light relay switch signal output.|
|10. External loop detector signal anti-smashing interface, infrared sensor signal anti-smashing interface.|
|11. Count mode interface.|
|12. Arm Open priority anti-smashing function. No matter the current gate in what state, the operator through the triple push button, software or remote control to issue an open command, the gate will give priority to the implementation of the opening action.|
|13. Barrier with anti-collision protection function, when the vehicle hits the gate arm, arm can be swing out to avoid damage to the vehicle, and barrier gate machine.|
|14. Delay closed selection function.|
|15. High-sensitivity arm auto reverse function (intensity can be adjusted).|
|16. Parking system interface.|
|17.RS485 or RS232 network communication control up &down interface (no need to install communication module)
1. NO/NC mode selection, in the dip switch 1, ON for NC, OFF for NO.
2. Self-locking when power off or gate automatically open selection. In dip switch 2, ON is for automatic opening
when power off;
3. Automatic reverse or stop selection when meets external obstacle. In dip switch 3, ON is for automatic
stop and OFF is for automatic reversing;
4. Auto closing speed adjustment selection, in the dip 4, 0.9s and 1.3s for option. ON is for 0.3s.
5. Delay automatic closed selection. Dip switch5,6,7,8 are for it and the delaying time is 1s,2s,3s,4s,5s,
8s,10s,15s,20s,25s,30s,35s,40s,50s,60s for option.
6. The boom angle adjustment, suitable for some areas that the boom can’t reach the vertical position
caused by obstacle. Adjustable for 60°, 70°, 80° and 90°. And the dip switch is another independent one (1 2 switch).
7. Maintenance mode switch, convenient for possible repairing and adjusting.
8. RS485 interface, can connect with computer, check the barrier gate state and alarm information.
9. Parking lot open/close control signal and remote control open/close signal are separate. Arm opening
have memory function, Number of pulse arm opening, and closed after number of cars (must be equipped with a vehicle detector)
10. Emergent stop input signal function.
11. Arm swing out signal input function.
12. Alarm information output function.
13. Barrier gate OK signal output function.
14. All input ports are optoelectronic isolation, the input voltage range is DC5 ~ 24V
15. Vehicle detector signal input and infrared signal input, that is, use the output COM, NC of the loop detector
(normally the No.4 and No.11, specially related with detector, the barrier gate not respond to closing command
when the coil is not connected).The infrared detector uses the NPN type.
If you have any question, please contact us freely!
Sales representatives: Keira
Whatsapp: +86 18507481610
Contact Person: Keira Xia