Product Details
Place of Origin: China
Brand Name: WONSUN
Certification: CE, ISO, SGS
Model Number: DZTP-133-A
Payment & Shipping Terms
Minimum Order Quantity: 1PC
Price: negotiation
Packaging Details: Packed in bubble wrap firstly, and then reinforced with carton for outer packing.
Delivery Time: 3-7 working days after received your payment
Payment Terms: T/T,Western Union,Money Gram,Alibaba Trade Assurance,Paypal etc.,
Supply Ability: 1000 Sets/Month
Name: |
Heavy Duty Intelligent Barrier Gate With Max 6 Meters Straight Boom Barrier Gate Price |
Color: |
Orange / Black / Blue |
Mode Of Communication: |
Base RS-485 |
Max Boom Length: |
8 Meters |
Payment: |
1.) 30% T/T As Deposit In Advance And 70%T/T Before Loading |
Delivery Time: |
Delivery The Guardrail In10days After Receiving The Deposit |
Name: |
Heavy Duty Intelligent Barrier Gate With Max 6 Meters Straight Boom Barrier Gate Price |
Color: |
Orange / Black / Blue |
Mode Of Communication: |
Base RS-485 |
Max Boom Length: |
8 Meters |
Payment: |
1.) 30% T/T As Deposit In Advance And 70%T/T Before Loading |
Delivery Time: |
Delivery The Guardrail In10days After Receiving The Deposit |
Access Road Barrier Gate Toll Station Intelligent Barrier Orange
What are the disadvantages of Wonsun Intelligent Barrier?
1)The humanized clutch device: in case of power off, unlock the clutch device and raise the boom manually. By the time the power is supplied, lick the clutch device to make it work normally again.
2)Special spring device: Both the compression spring and tension spring can be used in the machine, Using the compression spring can avoid accidents caused by the tension spring.
3)Three control buttons: for Intelligent Barrier boom raising, falling, and pausing.
4)Intelligent Barrier Boom backtrack function: the boom will rise if hits something when falling.the
5)Infrared photocell design: for avoiding the crash when the boom falls, to prevent the vehicles from being pressed.
6)Both external and internal loop detectors are supported.
7)"open", "close" and "stop" controlling interfaces.
8)RS-485 communication serial interface(optional)
9)Traffic light signal connection device: red light for stop, green light for pass.
10)Intelligent Barrier Remote control and wire control for selection.
Intelligent Barrier Model Selection and Differences
Intelligent Barrier Specifications
|
Intelligent Barrier Model |
WST1211 |
|
Intelligent Barrier Working Temperature |
-40℃～+75℃ |
|
Intelligent Barrier Voltage |
220V±10%, 110V±10%, 50/60HZ |
|
Intelligent Barrier Rated power |
80W |
|
Intelligent Barrier Relative humidity |
≤90% |
|
Intelligent Barrier Remote control distance |
≥30m |
|
Intelligent Barrier Net weight |
48kgs |
|
Intelligent Barrier Speed |
1S,1.8S,3S, 6S |
|
Intelligent Barrier Max boom length |
6 meters |
|
Intelligent Barrier Motor Rotational speed |
1400rmp |
|
Intelligent Barrier Protection Degree |
IP44 |
Intelligent Barrier Communication with customers
1) Q: Connected power and pressed open/close button but the traffic barrier gate did not action.
|
A |
Reason |
Solution |
|
1 |
Fuse blown |
Check the fuse and power in the controller |
|
2 |
The battery of the remote control powered off |
Change a new one |
|
3 |
External protection circuit break or at protecting status |
Open the barrier door and click the OPEN/CLOSE button on the control box |
|
4 |
Same frequency interference |
Check photocell and loop detector |
2) Q: Connected power and press the open/close button, the traffic barrier gate will move but even when it is in the right position, the motor still runs and does not stop.
|
A |
Reason |
Solution |
|
1 |
Limit switch |
Adjust the horizontal/vertical limit switch to the correct position |
|
2 |
Main controller failure |
Change a new one |
3) Q: The motor running but the traffic barrier gate arm is not in action?
|
A |
Reason |
Solution |
|
1 |
Barrier arm at 45° position where is hard to move |
Unlock the clutch and manually rotate the arm to a horizontal or vertical position then try again |
|
2 |
The tension of the balancing spring is not suitable |
Adjust spring exactly |
|
3 |
Low working voltage |
Check the voltage and power |
4) Q: When opening/closing, the Intelligent Barrier arm cannot reach the right position (90° vertical & 180° horizontal)?
|
A. |
Reason |
Solution |
|
1 |
Length adjustment of connecting rod not correct |
Open the barrier door and unlock the clutch to check when the arm is at 90° vertical position if the master rod covers slave one; when the arm is at 180° horizontal position if the master rod and slave one are in the same straight line |
|
2 |
Nuts on the limit switch loose |
Tighten the nuts when arm at 90° vertical and 180° horizontal
|
| Market | Revenue(Previous Year) | Total Revenue (%) |
| North America | USD 63,608 | 1 |
| South America | USD 508,869 | 8 |
| Eastern Europe | USD 3,180,436 | 50 |
| Southeast Asia | USD 318,043 | 5 |
| Oceania | USD 127,217 | 2 |
| Mid East | USD 190,826 | 3 |
| Western Europe | USD 1,017,739 | 16 |
| Domestic Market | USD 954,130 | 15 |
1)Intelligent Barrier Arm type:
a.Straight arm- suitable for broad areas without height limitation
b.Folding arm- suitable for places with height limitations such as an underground parking lot
c.Fence arm- suitable for the place with the ban on animals.
2)The movement speed:
a. Quick speed 0.6S,0.8S
b. Medium speed 1S,1,8S
c. Slow speed 3S,4S,6S
Contact us for pricelist and catalog:
Sue Zhang
Email:sue@wonsunbarrier.com
Skype: SueZhang729
Whatsapp:+86 158 7925 9831
