|
Product Details:
|
| Name: | Single Loop Detector | Usage: | Parking Guidance System |
|---|---|---|---|
| Color: | Red | Type: | Single Or Doubel Channel |
| Weight: | 380g | Rating Voltage: | AC 220/110V OR DC 24/12V |
| High Light: | traffic loop detectors,vehicle detection loop |
||
1.Easy use and install
2.Low price
3.Comply with parking system
keywords: loop detector wire, double loop detector, vehicle loop detector, radiation detector, loop, alarm lamp, inductive loop detector, gate loop detector, single loop detector, digital loop detector
Specifications
1. Supply voltage AC: 220V, 110V, 24V, 12V
2. Supply voltage DC: 24V, 12V
3. Sensitivity: Adjustable in 3 increments (high .medium. low)
4. Operating temperature: -20°C to +65°C
5. Storage temperature: -40°C to +85°C
6. Frequency range: 20 kHz to 170 kHz
7. Reaction time: 100ms
8. Loop inductance: Ideal:80?H to 300?H (incl. conn. wiring): max: 50?H to500?H
9. Loop connection: <5m optimal
10. Loop connection wiring: Maximum length 200 meters,twisted at least 20 times per meter
11. Dimensions: 78x40x108 mm (L x W x H)
12. Net Weight: 300g
13.Frequency:the frequency can be altered by means of DIP6-Switch.
u to eliminate interference of two neighboring wire loops
u to eliminate interference of two neighboring loop detectors
u to eliminate interference of two neighboring distribution cables (loop detectors)
Description:
Loop detectors are used wherever vehicles have to be detected. Like monitoring and safe
guarding access ways to counting vehicles. The output signal can be used for controlling door
and gate drive mechanisms, operating barriers, controlling traffic light systems in car parks or
activating card dispensers in car parks
Application:
Parking Guidance System
Car Locating System
Parking Management system
Tragically
Attention:
When using more than 2 Detectors, please select different frequencies ,and screened cables for Detector or
connecting cables widely separated
Sensitivity:
In order to calibrate on site the wire loop to the loop detector, the sensitivity can be adjusted on the front of
the housing by means of a three-stage sliding switch.
Ø High: high sensitivity (e.g. also bicycles can be detected)
Ø Medium: medium sensitivity (e.g. for automobiles)
Ø Low: low sensitivity (preferably Lorries will be detected)
Ensure that the loop is NOT activated when making these adjustments.
Contact Person: Wonsun
Tel: +8618507481610
