Ultra-Speed 0.2s AC Servo Toll Barrier Gate with Carbon Fiber Round Arm

Ultra-Speed 0.2s AC Servo Toll Barrier Gate with Carbon Fiber Round Arm

1. Product Overview

2. Design and Installation

• Compact and Space - Efficient: Featuring an integrated design, the barrier gate is compact in size, easy to install, and doesn't occupy excessive space. This allows for flexible deployment in different environments, whether it's a busy highway toll station or a large - scale parking lot entrance/exit.
• Robust Construction: The mechanical structure is engineered for durability. High - quality materials and precise manufacturing ensure that it can withstand the rigors of continuous high - traffic use, providing long - term reliable service.

3. Technical Parameters

• Product Model: AC - DZ - 138B
• Product Dimensions: 290×368×840 (mm) for one specification and 292×368×940 (mm) for another, catering to different installation space requirements.
• Working Temperature: It can operate in a wide temperature range from - 35℃ to + 85℃, making it suitable for various climatic conditions, whether in extremely cold or hot regions.
• Running Speed: Ranges from 0.5 - 0.8s and 0.3 - 0.6s, allowing customization based on traffic flow needs. Faster speeds can be set for areas with very high traffic volumes to improve throughput.
• Driving Method: Utilizes a servo motor, which is known for its high efficiency, accuracy, and energy - saving features compared to traditional motors.
• Power Supply: AC 110V/220V, 50/60HZ, ensuring compatibility with standard power sources in most regions.
• Rated Power: 750W, providing sufficient power for the servo motor to drive the barrier arm smoothly.
• Remote Control Distance: Up to 100M (servo motor) and ≤100M (open & sunny weather), enabling convenient remote operation and management, which is useful for operators to control the barrier gate from a distance.
• Humidity: Can operate in environments with ≤90% humidity, suitable for areas with high humidity such as coastal regions or areas with frequent rain.
• Protection Class: IP54, providing protection against dust and splashing water, ensuring the internal components are protected in various outdoor environments.
• Adaptable Boom Length: Available in 2.5M - 6M and 1.5M - 2.5M, allowing selection based on the width of the access lane. Wider lanes can be covered with longer booms, while shorter booms are suitable for narrower entrances/exits.

•  Obstacle Rebound Protection: The barrier arm auto lifts when hitting obstacles while lowering to prevent vehicle and equipment damagee
• Loop Detector Anti-Crush Protection: The barrier arm lifts immediately upon receiving loop signals and stops lowering while signals persist toavoid hitting vehicles.
• Loop signal Priority Logic: Whether Raise the Barrier Arm or Lower the Barrier Arm, raise the Barrier Arm immediately after the LoopDetector is triggered; traffic safety takes top priority.
• Shock-Absorbing Anti-collision Structure: Anti-collision rubber strips and buffer foam fitted on the barrier arm to reduce impact damage.
• Barrier arm-Up Priority Control Logic: Raise command takes instant effect during barrier arm lowering; lower commands are disabled while thebarrier arm is rising to avoid misoperation.

• Contact Person: Keira Xia
• Mobile: +86 185 0748 1610
• Email: keira@wonsunbarrier.com
• Company Name: Shenzhen Wonsun Machinery & Electrical Technology Co., Ltd
• Address: 1st Floor, Zhigu, No. 2 - 10, South Jinlong Avenue, Shahu Community, Biling Street, Pingshan District, Shenzhen, China. (Postal Code: 518118)