|Yellow, OraVoltage::||AC90V~AC264V,DC24Vnge, Grey-black||Operation Time:||0.3,0.6,0.9,2,4sec Run Speed Adjustable|
|MTBF::||>5000,000 Times||Warranty::||2 Years|
|RS485:||YES||Product Name:||Built-in RS485 Computer Control Automatic Barrier Gate CE Approved DC Motor|
electric barrier gate,
auto barrier gate
Built-in RS485 Computer Control Automatic Barrier Gate CE Approved DC Motor
The DZ-138 servo barrier gate series, which manufactured by our company, adopts international advanced
technology, mechanical and electrical integrated design. Planet gear drive, high torque, un-blocked, oil tight,
no noise, automatically Self-locked when power off, with 10 million operation times. The motor uses the DC 24V
permanent magnet synchronous motor (PMSM motor), apply to the global voltage, high-speed operation and
rapid response, frequent positive &negative operation in 24 hours does not heat, speed time can be adjusted
based on the vehicle flow and arm length, safe and reliable. The series servo barrier gate is free-debugging
and free-maintenance, achieve the fully automation and intelligence, and the barrier arm open/close is fast
and smooth, easy to use and safe.
1. Gate automatically open when power off, no clutch design, no need human intervention. When power on,
gate automatically reset, restore to the gate closing state, truly unattended, fire safety standards. If special
requirement, manual operation is required when power off, operating arm open and close manually also can
be realized by setting up control board DIP switch, which ensure that the system can be used at any time.
2. The use of Single Compression Balance Spring device, good regulation, no noise, indefatigable, not easy
to break, safe and reliable.
3. A variety of input and output modes can be selected, normally open normally closed are optional.
4. Arm opening angle can be adjusted from 60 to 90 degrees, 10 degrees resolution, suitable for eaves prominent
place to install.
5. Closing speed can be adjusted.
6. Barrier gate up &down signal relay switch output.
7. Barrier gate running state: OK signal output indicating that the gate is working properly.
8. Barrier gate operation abnormal alarm signal output.
9. R&G Traffic light relay switch signal output.
10. External loop detector signal anti-smashing interface, infrared sensor signal anti-smashing interface.
11. Count mode interface.
12. Arm Open priority anti-smashing function. No matter the current gate in what state, the operator through the
triple push button, software or remote control to issue an open command, the gate will give priority to the implementation of the opening action.
13. Barrier with anti-collision protection function, when the vehicle hits the gate arm, arm can be swing out to
avoid damage to the vehicle, and barrier gate machine.
14. Delay closed selection function.
15. High-sensitivity arm auto reverse function (intensity can be adjusted).
16. Parking system interface.
17.RS485 or RS232 network communication control up &down interface (no need to install communication module)
18. Anti-collision alarm signal interface.
19. Adjustable speed port (from 0.9s to 10 s)
20. High-strength precision cast steel, industry moving parts beyond the industry quality
|Max length of arm||6mts|
|Machine Case||Varnished 2.0mm steel plate|
|Machine Case Size(W*D*H)||342*312*959mm|
|Operating Temperature Range℃||-45℃~+85℃|
|Driving Method||Servo motor|
|Motor No-load Speed||3000r/min|
|Remote Control Distance||≤100m (open, sunny weather)|
|Surface Treatment||Outdoor metal powder electrostatic spraying
DZ Controller Data:
|Voltage(±10%)||100-240 volt||100-240 volt|
|Max Power Consumption(watt)||8||8|
|Control Voltage||24V DC/max.3000mA||24V DC/max.3000mA|
|Open Collector Output Number||2||2|
|Zero Level Reversal Relay Number||3||3|
|Operating Temperature Range℃||-45℃~+85℃||-45℃~+85℃|
1. Two year’s free servicing is supplied (not including the arm and remote controller). In the condition
of complying with the operating instruction, without the unauthorized maintenance of the parts and the
machine have no obvious mechanical damage, we will provide a quality assurance for the barrier gate
product from the date of use for a period of two years or from the date of shipment up to three years
including all mechanical and electronic components other than special consumables.
2.Lifetime charged servicing is offered.
3.Technology servicing is supplied.
*The following situations are charged for servicing (or replacement):
1.Broken by wrong installation;
2.Broken by improper voltage;
3.The surfaces of the system destroyed by wrong installation or use.
4.Broken by natural disaster.
6.Servicing items out of the promises.
Why choose us:
1. Our Factory has 8 years OEM/ODM experiences in the line of barrier gate.
2. Prompt delivery time. Usually we keep stock of standard model which ensure the prompt delivery.
3. We accept OEM/ODM orders to meet the requirements of clients.
4. Trial order is acceptable. Clients can buy sample and test it before bulk order.
5. Online technical support makes it carefree to be our business partner.
6. A variety of transportation for your choice. Sea shipment, air cargo or express, depends on your demand.
7. Factory can be visited on working days. Clients are warmly welcome to visit our factory.
If you have any question, please contact us freely!
Sales representatives: Keira
Whatsapp: +86 18507481610
Contact Person: Keira Xia