|Brand Name::||WONSUN Automatic Barrier Gate||Running Speed:||1.5s-8s|
|Arm Type:||Straight,or Fence,folding||Advantages:||Bi-direction LEFT Or RIGHT|
|Auto Reverse Function:||Yes||Arm Material:||Aluminum Alloy|
Automatic Barrier Gate 140W,
Wireless Remote Control Automatic Barrier Gate,
24V Backup Battery Automatic Barrier Gate
Wireless Remote Control Automatic Barrier Gate 140W 24V Backup Battery Gate Barriers
1 Working temperature(motor): -35℃~+85℃
2 Rated voltage:DC24V
3 Running speed:1.5s-8s
4 Rated current:8.58A
5 Rated power:140W
6 No-load speed:1850rpm
7 Rated speed:1400rpm
8 Output Power:56.8N.m
9 Relative humidity:≤90%
10 Remote control distance:≤100M(in the open place)
11 IP Degree:IP44
12 Max length of arm:6M straight arm
1 The running speed can be adjusted from 1.5s to 8s
2 Can be quickly interchanged
3 Open the barrier gate by motor wheel when power off ,automatically reset after power on
4 Curved crank arm three- link movement structure, the operation is stable
5 Wireless remote control control open/close
6 Auto reverse function(force adjustable)
7 Infrared photocells connector is available
8 Loop detector connector is available.
|1:Hall error||Check the motor or wiring||
Generally, the motor or motor cable is not connected properly
|2.Under-voltage fault||The voltage is lower than 22.0V||Switching power supply or the battery voltage is not enough|
|3.Overcurrent protection||The load is too heavy or the drive board is damaged, and the motor wiring is incorrect.||
Check whether the motor cable is in good contact and replace the drive. Or load
|4.Locked rotation protection||The limit has not been reached for 5 consecutive times||Reset the limit point, or eliminate whether there is a problem with the limit device|
Electrical installation, wiring diagram
1 All the electrical connections are done before delivery and please do not change it randomly.The necessity
is to connect the AC220V power and grounding connection.
2 Traffic light connector:it can connect power no more than 40W.
3 Infrared photocells an-hit connector: connect the switch signal for receiver output.
4 Loop detector connectors:it supports both externally and internally loop detector(only one way can be chosen).
If external type is selected,just connect the switch signal for loop detector output.
If the internal type is selected,need connect the wire signal to vehicle detector wire interface.
5 Car parking system connectors: connect the system switch signal to this connector,then it can control the barrier gate operation.
6 Limit switch signal of up/down:with output COM,NO,NC,it monitoring the status of the barrier gate.
7 RS485 connector:after chosen the options RS485 module,it can manage MAX 15 pieces of barrier gates by PC software.
|Hexagon screw||M12*70||2||Piece||Fixing the boom|
|Boom press board||1||piece|
|Mounting batten||2||piece||Fixing the case|
|Expansion bolt||M16*150||4||unit||Fixing the case|
Learning type remote control
The remote control using special IC learning code remote controller, 418MHz wireless frequency, strong
anti-interference, long remote control distance, that can up to 100meters in good weather, use easily and
durable. The receiver of learning code remote control can store 16 different remote control codes, and support
unlimited number of same code remote control. The external receiver learned the remote control within 5
seconds when power on,press the open/close key at the same time to complete the learning, and reset to
continue learn when not complete. If repeat the learning, open the external receiver shell, there is a white
button on circuit board, hold down 15 seconds to delete the remote control code, continue to learn or press
the white button to learn.
Contact Person: Keira Xia