|
Product Details:
|
| Product Name: | Factory Supply Automated Parking Barrier Gate Traffic Barriers Boom Gate | Rating Voltage: | AC220V Or 110V |
|---|---|---|---|
| Power Supply: | 100W | Opearation Time: | 0.6s/1s/1.8s/3s/6s |
| Arm Type: | Straight/fence/folding Arm | Dimensions: | 320*280*920mm |
| Net Weight: | 56KGS | Keywords: | Parking Barrier Gate |
| High Light: | boom barrier gate,electric boom barrier |
||
Automated Parking Barrier Gate / Traffic Boom Barrier Gate 1m To 6m Arm Length
Keywords: barrier gate, barrier gates, barrier gate price, parking barrier gate,automatic barrier gate,automatic barrier gate with single bar,automatic barrier price,barrier gate remote control,boom barrier, boom arm gate barrier, boom barrier gate,parking barrier automatic, barrier road gate, barrier arm.traffic barrier gate, barrier system,fence barrier gate.
Technical Specifications:
| Product Name | factory supply automated parking barrier gate traffic barriers boom gate |
| Voltage | AC220V/110V,50/60HZ |
| Power Supply | 100W |
| Operation Time | 0.6s/1s/1.8s/3s/6s |
| Arm Type | sraight arm,fence arm,folding arm |
| Arm length | 1m to 6m |
| Remote Control Distance | ≥30m |
| Relative Humidity | ≥90% |
| Working Temperature | -40℃～+75℃ |
| Net Weight | 56kgs |
| MCBF | ≥5000000times |
What's the features and functions of barrier gate?
--Manual release available if meet power failure
--Machine core with compression spring, effectively avoids the accidents caused by spring breaking
--Die-casting aluminum alloy motor, precision and good for thermal radiating
--Motor cooling fan, solving the problem of heat-protection
--Double safety limit switches (photoelectricity limit switch/motor memory sensor)
--Reversing on obstacle
--Traffic light interface
--Wire control (switch signal) / Remote control
--RS485 communication module (optional)
--Support the Infrared Photocell for anti-bumping function (optional)
--Support the Loop Detector for auto-closing & anti-bumping (optional)
FAQ:
1) Connected power and press open/close button but barrier no action?
| No. | Reason | Solution |
| 1 | Fuse blown | Check fuse and power in controller |
| 2 | Battery of remote control powered off | Change a new one |
| 3 | External protection circuit break or at protecting status | Open the barrier door and click OPEN/CLOSE button on control box |
| 4 | Same frequency interference | Check photocell and loop detector |
2) Connected power and press open/close button, barrier will move but even when it is at right position, the motor still running and not stop?
| No. | Reason | Solution |
| 1 | Limit switch | Adjust the horizontal/vertical limit switch to correct position |
| 2 | Main controller failure | Change a new one |
3) Motor running but barrier arm no action?
| No. | Reason | Solution |
| 1 | Barrier arm at 45° position where is hard to move | Unlock clutch and manually rotate arm to horizontal or vertical position then try again |
| 2 | Tension of balancing spring not suitable | Adjust spring exactly |
| 3 | Low working voltage | Check the voltage and power |
4) When opening/closing, barrier arm cannot reach right position (90° vertical & 180° horizontal)?
| No. | Reason | Solution |
| 1 | Length adjustment of connecting rod not correct | Open barrier door and unlock clutch to check when arm at 90° vertical position if the master rod covers slave one; when arm at 180° horizontal position if master rod and slave one are in the same straight line |
| 2 | Nuts on the limit switch loose | Tighten the nuts when arm at 90° vertical and 180° horizontal position |
Contact Person: Miss. Keira
Tel: +86 185 0748 1610
Fax: 86-0755-84536531
