WS 10 Million Cycles 3rd AC Servo Motor Toll Barrier Gate For Toll Plaza and Etc Lane

WS 10 Million Cycles 3rd AC Servo Motor Toll Barrier Gate For Toll Plaza and Etc Lane

Technical parameters

3rd DC barrier manual.pdf

Ultra-High-Speed Automatic Barrier Gate | 3–8m Barrier Arm | Adjustable Speed | Intelligent Safety Protection

The Wonsun AC-SF-DZ-138B is a third-generation servo barrier gate designed for commercial parking facilities, industrial parks, factories, and high-traffic vehicle access points.

Equipped with a servo motor drive system and an intelligent control board, this automatic parking barrier gate supports adjustable opening and closing speeds, precise position control, and multiple safety protection functions.

With compatibility for barrier arms from 3m to 8m, flexible left-hand and right-hand installation, and multiple control interfaces, the AC-SF-DZ-138B provides a configurable vehicle access solution for parking system integrators, distributors, and engineering contractors.

Whether you are upgrading an existing parking entrance or developing a new access control project, this model offers flexible configuration options to match different lane widths and operational requirements.

Key Features of AC-SF-DZ-138B Servo Barrier Gate

1. Servo Motor Drive System

The servo motor drive system provides controlled barrier arm movement with adjustable operating speeds and precise positioning.

The dedicated control board supports parameter adjustment for opening speed, closing speed, soft start, and soft landing, helping match the operating characteristics to different installation requirements.

2. Adjustable Opening and Closing Speed

The barrier gate supports adjustable opening and closing speeds, with a specified closing speed range of 0.6–8 seconds.

Different speed settings can be selected according to the barrier arm configuration and project requirements.

This flexibility makes the model suitable for parking entrances with different traffic volumes and lane conditions.

3. Multiple Anti-Crush Protection Functions

Vehicle safety is an important consideration for automatic parking barrier gates.

The AC-SF-DZ-138B supports several protection functions:

• Obstacle Rebound Protection: The barrier arm automatically lifts when encountering an obstacle during lowering.

• Loop Detector Anti-Crush Protection: The barrier arm lifts when a loop detector signal is received and remains open while the configured vehicle detection signal persists.

• Infrared Photocell Input: Supports an external infrared photocell for additional obstruction detection.

• Barrier Arm-Up Priority: An opening command takes priority during the lowering process.

These functions help reduce the risk of vehicle impact and support coordinated operation with external safety devices.

4. Adjustable Soft Start and Soft Landing

The controller supports adjustable acceleration and deceleration parameters.

Soft start and soft landing settings help control the barrier arm's movement during opening and closing, reducing abrupt motion when properly configured.

This is particularly useful when matching the operating parameters to different arm lengths and installation conditions.

5. Flexible Left-Hand and Right-Hand Installation

The AC-SF-DZ-138B supports left-hand and right-hand installation configurations.

Its direction conversion structure allows the installation orientation to be changed according to the site layout.

This flexibility helps distributors and project contractors manage different installation requirements with fewer model variations.

6. Multiple Control Interfaces and System Integration

The dedicated control board supports multiple I/O interfaces and RS485 communication.

Available functions include:

• Barrier arm opening, closing, and stop inputs.

• Loop detector input.

• Infrared photocell input.

• Radar detector input.

• Traffic light signal output.

• LED indicator output.

• Fully open and fully closed status outputs.

• NO/NC signal configuration for relevant interfaces.

• Fire linkage input.

• RS485 communication.

These interfaces allow the barrier gate to be integrated with compatible parking management systems, vehicle detection devices, and access control equipment.

7. Manual Operation During Power Failure

When the external power supply is interrupted, the barrier arm can be raised manually using the designated manual operation mechanism.

An optional battery module can also be configured for automatic lifting during power loss, subject to the selected system configuration.

This provides additional flexibility for projects with specific emergency operation requirements.

Technical Specifications

Note: Actual operating speed depends on the selected barrier arm and configuration. Please confirm the required power supply version and compatible arm specifications before ordering.

Barrier Arm Compatibility and Configuration

The AC-SF-DZ-138B supports barrier arms from 3m to 8m, making it suitable for different parking entrance widths.

The controller provides selectable barrier arm configuration parameters to match different arm lengths and transmission settings.

Available arm options can include:

• Straight barrier arms.

• Fiber barrier arms.

• Aluminum barrier arms.

The final arm type, length, and controller settings should be confirmed according to the actual product configuration.

How to choose the right barrier arm?

For standard parking entrances, consider the actual lane width and required blocking distance.

For wider industrial entrances, a longer arm may be required. However, longer arms introduce different mechanical loads and operating requirements.

Always select a manufacturer-approved arm configuration rather than changing the arm length or weight without authorization.

Safety Protection for Automatic Parking Access

The AC-SF-DZ-138B can work with external vehicle detection and safety devices to support automatic access control.

Loop Detector

The loop detector monitors vehicle presence through an induction coil installed beneath the road surface.

When the configured loop signal is triggered, the controller can raise or hold the barrier arm open according to the selected operating mode.

Infrared Photocell

The infrared photocell provides an additional obstruction detection signal.

The controller supports an infrared input designed to trigger barrier arm lifting when the beam is interrupted.

Radar Sensor

The controller wiring diagram includes an interface for compatible radar detection devices.

Radar sensors can be considered for applications where non-contact vehicle detection is preferred.

Traffic Light

The control board provides traffic light signal outputs to support visual vehicle guidance at parking entrances and exits.

The combination of these devices should be designed according to the actual lane layout and required safety logic.

Typical Applications

The AC-SF-DZ-138B servo barrier gate is designed for a range of vehicle access control applications.

Commercial Parking Facilities

Suitable for shopping centers, office buildings, hotels, and public parking facilities requiring automated entrance and exit management.

Industrial Parks and Factories

The 3–8m barrier arm compatibility makes the model suitable for different industrial vehicle entrances, subject to the selected arm configuration.

Residential Communities

Can be integrated with RFID card readers, remote controls, and compatible parking management systems for residential vehicle access.

Logistics and Business Parks

Suitable for access control projects where vehicle detection, barrier arm control, and centralized management interfaces are required.

Toll and High-Traffic Access Points

Adjustable speed and multiple control interfaces provide configuration options for projects requiring coordinated vehicle access management.

Controller Functions and Intelligent Operation

The integrated control board provides multiple configurable operating functions.

Why Choose Wonsun AC-SF-DZ-138B?

For distributors, parking equipment suppliers, and system integrators, selecting a barrier gate manufacturer involves more than comparing motor specifications.

The AC-SF-DZ-138B offers several configuration advantages:

• Flexible Arm Configuration: Compatible with 3–8m barrier arms.

• Adjustable Operating Parameters: Opening and closing speed, soft start, and soft landing can be configured.

• Multiple Safety Inputs: Supports loop detector, infrared photocell, and radar integration.

• Flexible Installation: Left-hand and right-hand installation options.

• System Integration: RS485 communication and multiple I/O interfaces.

• Emergency Operation: Manual lifting during power failure, with optional battery-assisted automatic lifting.

• OEM/ODM Discussion: Product customization requirements can be discussed for different distributor and project needs.

Frequently Asked Questions

Q1: What is the maximum compatible barrier arm length of the AC-SF-DZ-138B?

The specified compatible barrier arm length is 3–8 meters. The final arm type and configuration should be confirmed according to the project requirements.

Q2: Is the opening and closing speed adjustable?

Yes. The controller supports adjustable opening and closing speeds. The specified closing speed range is 0.6–8 seconds. Actual settings depend on the selected arm configuration.

Q3: Does this servo barrier gate support anti-smash protection?

Yes. It supports obstacle rebound protection, loop detector anti-crush logic, and an infrared photocell input. Compatible radar detection can also be integrated.

Q4: Can the barrier gate be installed on either the left or right side?

Yes. The controller provides left-hand and right-hand model settings to match different installation layouts.

Q5: Can the barrier gate work with an LPR parking system?

The controller wiring diagram provides interfaces for camera-related equipment and external opening signals. Integration with an LPR parking system should be confirmed according to the camera's relay output and the controller's input requirements.

Q6: What happens if the power supply fails?

The barrier arm can be raised manually using the designated manual operation mechanism. An optional battery module is available for automatic lifting during power loss.

Q7: Is the AC-SF-DZ-138B suitable for outdoor installation?

The specified enclosure protection rating is IP54, and the stated operating temperature range is -35°C to +85°C. The installation should follow the manufacturer's environmental and wiring requirements.

Q8: What is the warranty policy?

The manual specifies one-year free maintenance, excluding the barrier arm and remote controller. Paid maintenance services and technical support are also available.

Request a Quote for AC-SF-DZ-138B Servo Barrier Gate

Looking for a servo barrier gate for a commercial parking facility, industrial entrance, or automated vehicle access control project?

Contact Wonsun with your project details:

• Required barrier arm length.

• Desired opening and closing speed.

• OEM/ODM customization needs.

Our team can help you evaluate the appropriate AC-SF-DZ-138B configuration for your project.

Wonsun is a professional manufaturer for barrier gate, boom barrier, sliding gate motor. If any interest, please contact us freely.
Email: keira@wonsunbarrier.com
Whatsapp: +86 185 0748 1610
Wechat: Keira_Xia