High-Performance LED Warning Light

I. Product Overview

II. Main Technical Specifications

Electrical Parameters

• Input Voltage: Supports a wide range of DC/AC 12V - 220V, enabling flexible installation in various power supply environments.
• Operating Current: With a maximum current draw of ≤50mA at 12VDC, it consumes minimal power while delivering consistent performance.
• Brightness: Boasts a high brightness level of >100Lm at 1.5W (utilizing Φ4 LEDs), ensuring excellent visibility even in bright ambient conditions.

Functional Modes

• Working Modes: Offers two selectable modes -
  • 1. Steady On Mode: Provides continuous illumination for scenarios requiring constant visual indication.
  • 2. Blinking Mode: Features a blinking frequency of 1HZ, highly effective for capturing attention in emergency or alert situations. Mode selection is conveniently achieved via a jumper.

Physical and Environmental Parameters

• Interfaces: Equipped with essential interfaces -
  • 1. Power Interface: For connecting to the power supply.
  • 2. Antenna Interface (if applicable): Facilitates wireless communication capabilities (depending on the specific model).
• Operating Temperature: Functions within a temperature range of -10℃ - 60℃, suitable for most indoor and outdoor environments.
• Storage Temperature: Can be stored safely in an environment with a temperature range of -20℃ - 70℃.
• Net Weight: Weighs 246.7g (including accessories), making it lightweight yet durable for easy installation.
• Product Standard Configuration: Each package includes 1 strobe light, 1 set of screws and wall plugs, 2 mounting bracket screws, and 1 user manual.

III. Installation Instructions

Pre - installation Preparations

1. Gather the necessary tools, such as a slotted screwdriver.
2. Ensure the installation area meets the requirements: a solid and vibration - free surface, and located in a position easily visible to the intended audience.

Step - by - Step Installation

1. Access the Internal Components
   • Use a slotted screwdriver to pry out the latches on both sides of the light casing and carefully remove the cover.
2. Power Connection
   • Locate the power terminal. Connect the appropriate wires to match the available power supply (compatible with DC/AC 12V - 220V, and DC polarity is insensitive). Ensure secure and proper wiring to avoid electrical issues.
3. Mode Selection (if Required)
   • If you need to switch between working modes (steady on or blinking), adjust the position of the jumper according to your requirement. Refer to the markings on the internal circuitry for correct jumper placement.
4. Secure the Cover and Test
   • Place the cover back onto the casing and secure it firmly using the latches. Turn on the power supply and verify that the flashing light operates as expected in the selected mode.

IV. Wiring Guide (if Applicable for Complex Installations)

Identifying Terminals

• Mode Selection Terminal: Used to configure the working mode of the light.
• Power Terminal: The primary connection point for supplying power to the device.

Wiring Steps

1. Disconnect the power supply before starting any wiring work to ensure safety.
2. Connect the wires to the corresponding terminals as per the design of your electrical system. For the power terminal, ensure proper voltage matching (DC/AC 12V - 220V).
3. After wiring, double - check all connections for tightness and correctness. Loose or incorrect connections can lead to malfunctions or safety hazards.
4. Restore the power supply and test the functionality of the flashing light, including mode operation (if relevant to your wiring changes).

V. Notes and Declarations

Safety Precautions

1. Power Disconnection: Always disconnect the power supply during installation, maintenance, or any work involving wiring adjustments. This prevents the risk of electric shock.
2. Secure Wiring: When using high - voltage AC power, ensure all wiring connections are extremely secure. Loose connections can result in arcing, overheating, and potential electric shock incidents. The manufacturer shall not be held responsible for accidents arising from improper wiring or installation.

Maintenance and Troubleshooting

1. Regular Inspection: Periodically check the flashing light for any signs of damage, loose connections, or performance degradation. Clean the light surface gently to maintain optimal brightness.
2. Troubleshooting Tips
   • If the light fails to operate, first check the power supply and wiring connections.
   • For mode - related issues, verify the jumper position and ensure it is correctly set.
   • In case of persistent problems, refer to the contact information provided by the manufacturer for technical support.