Advertising 4Sec Car Park Barriers Gate Brushless Motor DC24V Shopping Mall Parking Lot

Advertising 4Sec Car Park Barriers Gate Brushless Motor DC24V Shopping Mall Parking Lot
 
 
Technical Parameter
 

 
Functions
 
1. Arm direction can be quickly interchanged
2. The electric wheel opens the barrier when the power is off, and automatically locks when the power is on.
3. The balance arm travels, and the crankshaft motor drives.
4. Remote control to operate the gate.
5. The boom will automatically reverse when encountering obstacles.
6. Provide infrared photoelectric connector.
7. A loop detector connector is provided.
8. Well integrated with the parking lot system equipment, wire control (must be switch signal).
9. Provide dry contact signals (COM, NC, NO) for the parking lot system
10. Closing automatic delay (adjustable)
 

 Common Malfunctions and Solutions

1 The arm is no reaction when connect the power and press the open/close key.

a: Check the controller’s power supply and fuse.

b. There is no battery or power shortage on the remote control, the distance is too far.

c.There is co-frequency interference in the vicinity, check with the wire control interface to see if it’s normal.

d.The external protection circuit has failed or in a protected state,check the infrared device or loop detector device.

e: Check the motor and capacitor to see if invalid.

2 The motor is buzz,boom is no reaction when press the open/close key.

a:The voltage is insufficient,check the 220V power supply.

b:The gears are stuck, and hand wheel rotates several circles toward the loose place, and re-adjust the photoelectric limit to prevent the struck caused by mechanical limit from being before the photoelectric limit.

c: It’s imbalance between the balance spring and boom,re-adjust it.

3 The force for arm up become smaller,sometimes need the handle assistance to make it up.

a: Check the motor and capacitor.

b: Re-adjust the spring balance.
4 The boom could not raise up or fall down when press the open/close key.
a:The photoelectric limit is on bad contact,check the connections.
b:Replace the photoelectric limit switch.
5 The boom is not horizontal and vertical.
a:The photoelectric limit is shaft,re-adjust and fix.
b:Check the connection rod and adjust the boom to horizontal and vertical,and make the photoelectric limit acts before the mechanical limit.
 
FAQ
 

1. Are you manufacturer or trade company?

We're professional manufacturer who has our own factory in Shenzhen Pingshan since 2007.

2. What is your MOQ?

As for usual order, there is no MOQ; For OEM order, at least 30 sets.

3. What is your delivery time?

As for usual order, it is 3-5 days after received your payment with 50 sets order quantity.

For OEM order, it is 7-15 days after receieved your payment with 30 sets order quantity.

4. What is the terms of payment?

30%-40% advance deposite, 60%-70% balance before shipment for large quantity.

Contact us for pricelist and catalog:
Sue Zhang
Email:sue@wonsunbarrier.com
Skype:SueZhang729
Whatsapp:+86 158 7925 9831
RS485 Inverter Motor Automatic Barrier Gate With Bi-direction Main Shaftg Vehicle Barrier Gate