|
Product Details:
|
| Rated Voltage：: | DC24V | Drive Motor: | 4th DC Brushless Motor |
|---|---|---|---|
| Arm Length: | 8m Customized | Running Speed: | 1.2s-3s, 3s-8s |
| Product Name: | Road Traffic Barrier Speed Adjustable Parking Lot Gate Barrier 24V DC Brushless Motor Rfid Vehicle Barrier Gate | Motor Power: | 160W |
| High Light: | Brushless Motor Road Traffic Barrier,Speed Adjustable Road Traffic Barrier,Speed Adjustable Vehicle Barrier Gate |
||
Road Traffic Barrier Speed Adjustable Parking Lot Gate Barrier 24V DC Brushless Motor Rfid Vehicle Barrier Gate
Vehicle Barrier Gate Technical parameters:
| Working temperature | -35~+65℃ |
| Power supply | 24V DC |
| Open/close speed | 2.8s to 6s |
| Rated power | 150W |
| Driving method | DC brushless motor |
| Output torque | 56.8N.m |
| Protection grade |
IP54 |
Vehicle Barrier Gate Features:
1 The running speed can be adjusted from 3s to 8s
2 Can be quickly interchanged
3 Open the barrier gate by motor wheel when power off ,automatically reset after power on
4 Curved crank arm three- link movement structure, the operation is stable
5 Wireless remote control control open/close
6 Auto reverse function(force adjustable)
7 Infrared photocells connector is available
8 Loop detector connector is available.
9 Well-integrated with car parking system equipment,with wire control(must be switch signal)
10 Connector for traffic light(AC220V,power less than 40W)
11 Offering dry contact signal for car parking system(COM,NC,NO)
12 Auto-delay when closing(adjustable)
13 RS485 or CAN network communication interface(no need to install module)
14 Counting interface
15 24V backup battery interface(Can be charged by using solar energy)( optional)
| Menu code |
Parameter Scale |
Parameter name | Default | Unit | Remark |
| H00-00 | 25-95 | Open speed adjustment | 35 |
Corresponding PWM duty cycle 25%-95%, step size is 1 |
|
| H00-01 | 25-95 | Close speed adjustment | 35 |
Corresponding PWM duty cycle 25%-95%, step size is 1 |
|
| H00-02 | 5-40 |
Open in place decelerate angle |
35 |
The larger the angle value, the less likely it is to shake the arm when it is in place. |
|
| H00-03 | 5-40 |
Close in place decelerate angle |
35 |
The larger the angle value, the less likely it is to shake the arm when it is in place. |
|
| H00-04 | 1-20 |
Open accelerate adjustment |
1 | ms | The smaller the number, the faster the speed |
| H00-05 | 1-20 |
Close accelerate adjustment |
8 | ms | The smaller the number, the faster the speed |
Motor wiring:
| Power line | Hall limit line | ||||||
| U | V | W | Vcc | Hu | Hv | Hw | GND |
| Yellow(bold) | white(bold) | blue(bold) | red(narrow) | yellow(narrow) | whit(narrw) | blue(narrow) | black(narrow) |
Vehicle Barrier arm balance adjustment:
1,Please check and confirm arm status in horizon and vertical position,then tighten 2pcs M12 screw.
2,According to arm balance status, repeat adjusting the spring level of tightness of M8*140MM, make sure
the arm open and close in stable.
3,For the barrier gate with double springs,please adjust the two springs simultaneously.
4,If arm open and close shake too much, Please check below picture. Open arm shaking a lot means spring
is too tight, loose a little. Close arm shaking too much means spring too lose, repeat tighten a little spring.
Vehicle Barrier Gate FAQ:
Q1.How about payment terms our company provide?
A: T/T
Q2.Which is your min order?
A: 1 piece
Q3.Model color size and craft for all barrier gates can be customized?
A: Yes, we can, welcome OEM & ODM. We also can put logo of your company on product
Contact Person: Keira
Tel: +86 185 0748 1610
Fax: 86-0755-84536531
