|Running Speed:||1.2sec-4sec, 3sec-8sec||Advantages:||Speed Adjustable, Bi-direction LEFT Or RIGHT, Hall Limit, DC Brushless Motor|
|Product Name:||Two Speed Range 8s DC Brushless OEM 6M Folding Arm For Driveway Barrier Gate||CE, ISO:||Yes|
|Rated Power:||160W||Driving Method:||Dc Brushless Motor|
Folding Arm Driveway Barrier Gate,
8s Driveway Barrier Gate,
Brushless Motor automatic driveway barrier
Two Speed Range 8s DC Brushless OEM 6M Folding Arm For Driveway Barrier Gate
1 The running speed can be adjusted from 3s to 8s
2 Can be quickly interchanged
3 Open the barrier gate by motor wheel when power off ,automatically reset after power on
4 Curved crank arm three- link movement structure, the operation is stable
5 Wireless remote control control open/close
6 Auto reverse function(force adjustable)
7 Infrared photocells connector is available
8 Loop detector connector is available.
9 Well-integrated with car parking system equipment,with wire control(must be switch signal)
Working temperature(motor): -30℃~+70℃
Running speed:1.2s~4s/ 3s~8s
Remote control distance:≤100M(in the open place)
Max length of arm:6M straight arm
Adjust the Position of Barrier Arm
To adjust the position of the arm (for example, after exerting excessive force), please take the steps as below:
1. open the barrier gate door and remove the cover
2. Loosen the two fastening screws of the DZ-8 on the pendulum shaft with an M12 Allen key, so that the barrier arm can be repositioned by hand.
3. Calibrate the position of the barrier arm (horizontal position, as shown in Figure 1).
4. Use a hexagon wrench to re-tighten the two fastening screws
1. The internal wiring of this machine has been completed when it leaves the factory, please do not change it,
just connect the 220V power supply and the protective ground wire to work.
2. Traffic light interface: 2A24V voltage traffic light use.
3. Infrared anti-smashing interface: external infrared anti-radiation device, and the switch signal of the anti-radiation
output can be connected.
4. Ground sense interface: support external ground sense. When using an external ground sensor, you only need
to connect the switch signal output by the ground sensor.
5. Parking system interface wire control interface: connect the switch signal from the system to this interface to
control the barrier.
6. Starting limit and landing limit signal output: output COM/NO/NC switch signal to the system to inform the
current state of the barrier.
7. RS485 or CAN communication interface: PC software can be used to manage more than 15 barriers.
WONSUN Barrier Series: Click the picture and leave your message, Keira will reply you in an hour.
|Classic AC barrier||Economical DC Barrier||Hot Sale DC Barrier||Hot Sale DC barrier||High-end Servo Barrier|
Wonsun is a professional manufaturer for barrier gate, boom barrier, sliding gate motor. If any interest, please contact me freely.
Whatsapp: +86 185 0748 1610
Intelligent Parking Barrier Gate 6m Arm with DC24V Brushless Motor For Parking lot SYSTEM
Contact Person: Keira Xia