Roadway Safety Boom Barrier Gate , Parking Lot Barriers With Boom Bracket

Roadway Safety Automatic Boom Barrier Parking Lot Barrier With Boom Bracket

Common Malfunctions and Solutions:

81 Motor works but there is no reaction on the arm.

a: Please check whether the clutch device is locked or not.

2 There is too much vibrant when the boom is rising or falling.

a: Please check whether the shock absorption rubber is broken or not.If yes,change a new one.

b: Please check whether the balance spring is overused and distorted.If yes,change a new one;or spin bottom adjust nut.

3 The boom could not rise up or fall down to the end.

a: When change a long boom to a short one,please readjust it.

b: The sensor does not plug well,please check it.

c: The “Speed adjust switch” is wrong adjust,please readjust it.

4 The distance of the remote control decreases

a: Check whether the charge capacity of the remote controller is enough or not.

5 There is no reaction when pressing the remote controller buttons.

a: Please check whether the power is supplied to the barrier gate or not.

b: Please check whether the fuse is burnt out or not.

c: Please check whether the code both in the remote controller and the control board are accordant or not.

6 There is no reaction on the motor when user changes a control board.

a: Please check the capacitance is correctly fixed or not.

b: Please check the sensor is right inserted or not.

7 If the user changes a new control board and the boom is abnormal when rising and falling.

a: Please adjust the “Gate Type Selection”(Refer to the control board)

Working environment

1 Machine core working temperature: -25℃~+85℃

2 Working temperature(control panel): -20℃~+75℃

3 Rating voltage:220V±10%,50/60HZ

4 Rated Power:100W

5 Humidity:≤90%RH

6 Distance of remote control:100M＞L≥30M in the open place

Functions & Features:

Installation and Connections of the Electric Part

(A)220V(110V)power terminal:

Take off the output terminal cover and plugin the power wire.

(B)The traffic light (R&G light) connection:

Traffic light connector is for 220v power.Connect the Red Light Wire to R output terminal,the Green Light Wire to G output terminal.And the COM terminal is the loop input terminal for the traffic light circuit.

(C) Infrared emitter and receiver:

To use this device,first connect the infrared device to power output terminal,and then connect the receiver to the infrared signal input terminal.

(D) Loop detector terminal:

This controller can support both the internal and the external loop detector connections.

However,just one way can be chosen.

If external loop detector is selected,just connect the loop detector to 220V power,and connect the signal wire to the signal input terminal.

If the internal loop detector is selected,connect the internal loop detector to the socket on the circuit board directly and the signal wire to vehicles detector signal input terminal.

(E) “COM”,“UP”,“DOWN”,“STOP”signal input terminal.

The input terminal can work as a switch.If choose the “UP”, “DOWN”, “STOP”input terminal to connect the "COM" by a wire ,the main board will give the correlative reaction signal to the barrier gate arm.

The user can use this method for the IC system controlling or the circuitry controlling.(Note:the wire control is advised to be used in the guards’ room)

(F) “UP ”and “ DOWN” position limit switch.

This switch transmits the “UP” and “DOWN” command to boom by optical signal(Notice:More details please refer to Fig.12)

(G) RS485 serial communication terminal:

The main board supports the RS485 serial communication to control the boom UP and DOWN.Please link the computer with RS485 interface by the communication module.

The software please refer to the instruction in the disk.(Optional device)

(H) Terminal special for motorcade:

If the users have installed the loop detector,and do not want the barrier boom fall down automatically when there are still some cars in line behind the passing car.Then please add an exterior circuit to this device.If the circuit is on,the loop detector will work;if the circuit is off,the loop detector will not work.

Service Items:

1 One year’s free servicing is supplied(not including the arm);

2 Lifetime charged servicing is offered;

3 Technology servicing is supplied.

The following situations are charged for servicing(or changing):

1) Broken by the wrong installation.

2) Broken by improper voltage.

3) The surfaces of the system destroyed by wrong installation or use.

4) Broken by natural disaster.

5) Overdue.

6) Servicing items out of our promises.

The upgrade and improvement of the product won’t be notified if there is any.

The explaining authority of this product instruction and service article belongs to the production factory.

FAQ:

1. Are you manufacturer or trade company?

We're professional manufacturer who has our own factory in Shenzhen Pingshan since 2007.

2. What is your MOQ?

As for usual order, there is no MOQ; For OEM order, at least 30 sets.

3. What is your delivery time?

As for usual order, it is 3-5 days after received your payment with 50 sets order quantity.

For OEM order, it is 7-15 days after receieved your payment with 30 sets order quantity.

4. What is the terms of payment?

30%-40% advance deposite, 60%-70% balance before shipment for large quantity.

5. How long will your gate barrier working?

Gate barrier life span is 5-10 years.

6. What should we do if there have problems during using?

my dear friend, We have 1 year guarantee. Any gate barrier problems you have, Welcome email or call me!

We will provide our best professional service for you.

Contact Details:

Email: keira@wonsunbarrier.com

Whatsapp: +86 18507481610

Skype: zimin1314

Roadway Safety Automatic Boom Barrier Parking Lot Barrier With Boom Bracket

Roadway Safety Automatic Boom Barrier Parking Lot Barrier With Boom Bracket

Roadway Safety Automatic Boom Barrier Parking Lot Barrier With Boom Bracket