Changeable Arm Direction Parking Gate Barrier No Noise With Anti - Collision Protection 

24V DC Servo Brushless Motor Automatic Parking Barrier With In-built RS485

Advantages:
 
1. When Power off, gate automatically open, no clutch design, no need human intervention. When power on,
gate automatically reset,
restore to the gate closing state, truly unattended, fire safety standards. If special requirement, manual
operation is required when
power off . Operating arm open and close by hand also can be realized by setting up control board DIP switch,
which ensure that the system can be used at any time.
2. The use of Single Balance Spring device, good regulation, no noise, indefatigable, not easy to break, safe
and reliable.
3. A variety of input and output modes can be selected, normally open normally closed optional.
4. Arm opening angle can be adjusted from 60 to 90 degrees, 10 degrees resolution, suitable for eaves
prominent place to install.
5. Closing speed can be adjusted, 0.9S, 1.3S.

6. Barrier gate up&down signal relay switch output.

7. Barrier gate running state: OK signal output indicating that the gate is working properly.
8. Barrier gate operation abnormal alarm signal output.
9. Traffic light relay switch signal output.
10. External loop detector signal anti-smashing interface, infrared sensor signals anti-smashing interface.
11. Count mode interface.
12. Arm Open priority anti-smashing function, regardless of the current gate in what state, the operator
through the triple push button,
software or remote control to issue a gate arm up, the gate will give priority to the implementation of the
opening action.
13. Barrier with anti-collision protection function, when the vehicle hits the gate arm, arm can be swing
out to avoid damage to the vehicle
and barrier gate machine.
14. Delay down selection function.
15. high sensitivity arm auto reverse function (intensity can be adjusted)
16. Parking system interface
17.RS485 or RS232 network communication control up&down interface (no need to install communication module)
18. Anti-collision alarm signal interface.
 

 
Operation Time and Boom Length Configuration Parameter
 

Notice: the “Boom Height ” means height from the boom holding point to the ground

Service Items
 
1. Two year’s free servicing is supplied (not including the arm and remote controller). In the condition
of complying with the operating instruction, without the unauthorized maintenance of the parts and the
machine have no obvious mechanical damage, we will provide a quality assurance for the barrier gate
product from the date of use for a period of two years or from the date of shipment up to three years
including all mechanical and electronic components other than special consumables.
2. Lifetime charged servicing is offered.
3. Technology servicing is supplied.
*The following situations are charged for servicing (or replacement):
1. Broken by wrong installation;
2. Broken by improper voltage;
3. The surfaces of the system destroyed by wrong installation or use.
4. Broken by natural disaster.
5. Overdue.
6. Servicing items out of the promises.
 
 
FAQ: