|Product Name:||High Quality 2 Warranty Access Road Barrier Gate Parking Lot Boom Barrier||Motor Rated Power:||50W,max 100W|
|Running Speed:||0.3s/0.6s/0.9s/2s/4s||Rating Voltage:||AC90~264V,DC12V|
|Meterial:||2mm Cold-roll Steel Sheet||Housing Size:||342*312*959mm|
|Remote Control Distance:||≤100m||Keyword:||Parking Barrier Gate|
security boom gate,
boom barrier gate
High Quality 2 Warranty Access Road Barrier Gate Parking Lot Boom Barrier
The barrier gate motor uses the DC 24V permanent magnet synchronous motor (PMSM motor), adjust to the global voltage, high-speed operation and rapid response, it will not overheat after 24 hours, frequent operation, speed time can be adjusted based on the vehicle flow and arm length, safe and reliable. The series servo barrier gate is free-debugging and free-maintenance, achieve the fully automated and intelligent, and the barrier arm open/close is fast and smooth, easy to use and safe.
|1||Product Name||High Quality 2 Warranty Access Road Barrier Gate Parking Lot Boom Barrier|
|4||Motor Power||50W,max 100W|
|5||Boom Length||2meter to 6meter(max)|
|8||Lifetime||>10 million times or 10 years|
|10||MTBF||>5 million times|
|12||Remote Controll Distance||≤100 meter|
|13||Motor Speed||3000 r/min|
|17||Application||Parking Lots, Toll Gates, Goods Yards, Railway Crossings,Commercial Premises, Apartment Block Access|
1. Gate automatically open when power off, no clutch design, no need human intervention. When power on, gate
automatically reset, restore to the gate closing state, truly unattended, fire safety standards. If special requirement,
manual operation is required when power off, operating arm open and close manually also can be realized by setting
up control board DIP switch, which ensure that the system can be used at any time.
2. The use of Single Compression Balance Spring device, good regulation, no noise, indefatigable, not easy to break, safe and reliable.
3. A variety of input and output modes can be selected, normally open normally closed are optional.
4. Arm opening angle can be adjusted from 60 to 90 degrees, 10 degrees resolution, suitable for eaves prominent place to install.
5. Closing speed can be adjusted.
6. Barrier gate up &down signal relay switch output.
7. Barrier gate running state: OK signal output indicating that the gate is working properly.
8. Barrier gate operation abnormal alarm signal output.
9. R&G Traffic light relay switch signal output.
10. External loop detector signal anti-smashing interface, infrared sensor signal anti-smashing interface.
11. Count mode interface.
12. Arm Open priority anti-smashing function. No matter the current gate in what state, the operator through the triple
push button, software or remote control to issue an open command, the gate will give priority to the implementation of the opening action.
13. Barrier with anti-collision protection function, when the vehicle hits the gate arm, arm can be swing out to avoid
damage to the vehicle, and barrier gate machine.
14. Delay closed selection function.
15. High-sensitivity arm auto reverse function (intensity can be adjusted).
16. Parking system interface.
17.RS485 or RS232 network communication control up &down interface (no need to install communication module)
18. Anti-collision alarm signal interface.
19. Adjustable speed port (from 0.9s to 10 s)
20. High-strength precision cast steel, industry moving parts beyond the industry quality
Machine Core Componets
1.Are you the manufacturer or trade company?
-------We're professional manufacturer who has our own factory in Shenzhen since 2007.
2.What is your biggest sadvantage?
----------Serve motor,support for AC and DC power,only us use this motor for barrier gate in China,rod and operation time can be adjusted,no limit switch,free-debbugging.
3.Why the price is higher than others?
-------This barrier gate combining permanent-magnet synchrous serve motor(PMSM motor),the technology is the mostt anvanced in China.At the same time,we can supply the more cheaper price barrier gate to meet different clients.
4.What's the MOQ?
-------Sample order for 1 set is supported.
5.What is your delivery time?
---------As for usual order,it is 3-5 days after received your payment with 50 sets order quanlity.
--------For OED order,it is 7-15 days after received your payment with 30 sets order quality.
6.What is thr terms of payment?
--------30%-40% advance deposite,60%-70% balance beforefor shipment for large quantity.
7.What is your Warranty?
--------Our Warranty is 2 year.
Contact Person: Wonsun