|Working Environment Temperature:||-40 ℃ ~ 75 ℃||Cabinet Material:||2.0mm Cold Roller Steel Plate|
|Operation Time:||0.3,0.6,0.9,2,4sec||Motor No-load Speed::||3000 R / Min|
|Lifetime::||More Than 10 Million Or 10 Years||Product Name:||Low Noise High Speed Servo Motor Barrier Automatic Boom Barrier For Toll Gate Station|
boom barrier gate,
security boom gate
Low Noise High Speed Servo Motor Barrier Automatic Boom Barrier For Toll Gate Station
Model: DZ-138 automatic boom barrier
opening and closing time:≤ 0.6s, 0.9s, 2s, 4s
Rated voltage:AC100V ~ AC264V, DC24V
Frequency:50Hz ~ 60Hz
Motor rated power:50W, the maximum power of 100W
Working environment temperature:-40 ℃ ~ 75 ℃
Power:standby ≤ 8W, run ≤ 100W
Dimensions (W * D * H):342 * 312 * 959mm
Lifetime:more than 10 million or 10 years
MTBF:> 5 million times
Relative humidity:≤ 90%
Motor no-load speed:3000 r / min
Remote control distance:≤ 100 meters
Longest ARM length:6 meters
Output torque:0.86N.M * 140 = 120N.M.
running noise:< 50dB
Surface treatment: Outdoor metal powder, electrostatic spraying
1.When Power off, gate automatically open, no clutch design, no human intervention. When power on,
gate automatically reset, restore to the gate closing state, truly unattended, fire safety standards. If
special requirement, manual operation is required when power off . Operating arm open and close by
hand also can be realized by setting up control board DIP switch, which ensure that the system can be
used at any time.
2. The use of Single Balance Spring device, good regulation, no noise, indefatigable, not easy to break,
safe and reliable.
3. A variety of input and output modes can be selected, normally open normally closed optional.
4. Arm opening angle can be adjusted from 60 to 90 degrees, 10 degrees resolution, suitable for eaves
prominent place to install.
5. Closing speed can be adjusted, 0.9S, 1.3S.
6. Barrier gate up&down signal relay switch output.
7. Barrier gate running state: OK signal output indicating that the gate is working properly.
8. Barrier gate operation abnormal alarm signal output.
9. Traffic light relay switch signal output.
10. External loop detector signal anti-smashing interface, infrared sensor signals anti-smashing interface.
11. Count mode interface.
12. Arm Open priority anti-smashing function, regardless of the current gate in what state, the operator
through the triple push button, software or remote control to issue a gate arm up, the gate will give priority
to the implementation of the opening action.
13. Barrier with anti-collision protection function, when the vehicle hits the gate arm, arm can be swing
out to avoid damage to the vehicle and barrier gate machine.
14. Delay down selection function.
15. high sensitivity arm auto reverse function (intensity can be adjusted)
16. Parking system interface
17.RS485 or RS232 network communication control up&down interface (no need to install communication
18. Anti-collision alarm signal interface.
19. Arm direction change is simple.
20. Adjustable speed port (S curve adjustment)
Please chat with me online if you want to learn more details quickly.
Wonsun is a professional manufaturer for barrier gate, boom barrier, sliding gate motor. All products with CE certificate, 100% raw material.
Whatsapp: +86 185 0748 1610
Related products:(Clik below picture, you will get more)
Contact Person: Keira Xia