|Name:||CE Certificated Automatic Sliding Gate Motor Accessories Of Infrared Photocell Beam Sensors||Power Supply:||DC 10.5V~24V/0.5A|
|Infrared Wave Length:||940nm||Response Speed:||50m/s|
|Infrared Transmission Frequency:||1.92KHZ||Wrrantty Year:||1 Year|
car loop detector,
sliding gate rack
CE Certificated Sliding Gate Motor Accessories of Infrared Photocell Beam Sensors
|Working Voltage||DC 12V/24V|
|Working Current||R - 15mA ; T - 30mA|
|Use||Home Security/Access Control System|
1.Single beam sensor/single beam detector is used for automatic slide door, coil door , garage door windows etc.
2.Consists of a transmitter and a receiver, and the integrated amplifier can produce infrared beam.
Narrow infrared beam (I or II) can avoid interruption by external light.
3.Even installed at low height(20-40cm from the floor), the detecting distance can also be guaranteed(5-15meters).
4.The beam produced by MICROCELL provides a self-detecting function for the sliding doors. Once the self-detecting beam is interrupted, the door will stop closing and reverse rapidly to the utmost width. The door will open until the detecting beam is resumed. When the door completely closes, the detecting beam becomes invalid.
Contact Person: Wonsun