Payment & Shipping Terms:
|Name:||2mm Cold Rolled Steel Sheet Automatic Barrier Gate Toll Gate System||Rated Power:||80W|
|Voltage:||220V±10%, 110V±10%, 50/60HZ||Motor Rotational Speed:||1400rmp|
|Speed:||0.6s,1s,1.8s,3s,4s,6s||Remote Control Distance:||≥30m|
2mm Cold Rolled Steel Sheet Automatic Barrier Gate Toll Gate System
What is the davantages of Wonsun barriers?
1)The humanized clutch device:in case of power off, unlock the clutch device and raise the
boom manufally. By the time the power is supplied, lick the clutch device to make it working
2)Special spring device:Both the compression spring and tension spring can be used in the
machine, Using the compression sprin can avoid accidents caused by the tension spring.
|3)Three control buttons:for boom raising, falling and pausing.|
|4)Boom backtrack function:the boom will rise if hits something when falling.|
5)Infrared photocell design:for avoiding the crash when the boom falling, so as to prevent
the vehicles from being pressed.
|6)Both external and internal loop detectors are supported.|
|7)"open","close" and "stop" controlling interfaces|
|8)RS-485 communication serial interface(optional)|
Power Supply: 220v±10%50/60Hz 110v±10%50/60Hz
Motor Rotational Speed:1400rpm
Remote Control Distance:≤50m
Max Boom Length:1-8M
Each barrier gate will include:
1 pcs Gate Barrier
1 pcs arm boom (from 1m to 6m can customised)
1 pcs control panel(built inside)
2 pcs remote controllers
1 pcs manual book
|Anti-collision protects boom arm (optional)|
Once anti-collision mechanism installed, it will protects the boom arm not to be damaged once
boom arm was collided by a vehicle.
|Safety--- Anti-hit by pressure resistance bounce|
While moving down,arm will immediately go back to vertical position once it is obstructed by an
imposed force, which protects the vehicle or person not to be hit by boom arm. The sensitivity is
|Safety--- Anti-hit by Loop Detector (Optional)|
While barrier boom moving down, If a coming vehicle was detected to be existing on the ground
induction coil, the arm will go back to vertical position immediately until loop input was dismissed
and then the arm will go down immediately.
|Safety--- Anti-hit by photocell (Optional)|
While arm moving down, If infrared transportation between transmitter and receiver is blocked by
human or vehicle, the arm will go back to vertical position immediately. The arm will automatically
close once the infrared transportation recovers.
|Safety--- Anti-hit by “Opening Priority”|
If a vehicle is coming while arm moving down, the arm will immediately go back to vertical position
once a open command is given, which protect the vehicle not to be hit by arm.
|Automatically Close by loop detector (Optional)|
If loop detector is installed, after vehicle passed the barrier will automatically close once the loop
input was triggered
|Automatically open by loop detector (Optional)|
|If loop detector is installed, when barrier boom is in horizontal position, the barrier boom will go up immediately once the loop input was triggered|
|Manually control in case of no power|
Once power is off, just open the cabinet and manually control the barrier by a gear mechanism.
Also barrier boom can be manually locked in any position between horizontal and vertical, the
lock status will remain until unlock manually.
|Boom to open up fully or close down in case of power failure|
If power is suddenly off while boom closing, boom will automatically close down fully if the angle
between boom and vertical plane beyond 45 degree. If power failure occurs during boom opening,
boom will automatically continue to open up fully if the angle between boom and level surface
beyond 45 degrees
|Anti-condensation in cold climate|
The barrier remains low power consumption even without closing and opening input, which will
keep the motor in normal temperature. The lubricant will not be frozen so that the barrier will keep
working in frozen environment
For the things that most customer want to know:
1. MOQ: for our usual order, there is no MOQ; But for customized order, like customize color,
printing LOGO, corrosion protection base, the MOQ is 30 sets.
2. Delivery Time: as for usual order, 3-7 days when we received your advance deposite or full payment(including Saturday), For customized order, it is 10-15 days after receiving your payment(including Saturday)
3. Production Potential: 80 sets of barrier gate finished in one day for usual order, for customized
order, according to your detailed requirements
4. Quality Control: 3 control lines and 6 QC for Checking, first is motor testing line which can
promise you good and durable motor;second is machine core testing line which can promise you
stable function;final is barrier gate testing line which can promise you perfect working with its
required boom with our experienced technicist's debugging
5. Service and Support: as for presales service, we will provide all the information you need and
questions you asked; for aftersales, we will offer long term technical support, and we're sure that
any of your feedback will receive our careful attentions and prompt reply.
6. Warranty: 12 months Since the barrier gate you recieve
7. Delivery Way: we can send the goods to you by Sea, Airplane and Express, but you need tell
us which kind of way do you prefer and relative information. for example, if you want to delivery
by sea, please kindly send us the shipping requirements, like FOB or CIF, and your nearby port.
8. Payment: for sample order: full payment; for usual order, 30-40% advance deposite, balance
before shipment for large quantity.
As for here, if you have any pending orders or inquiry, please kindly feel free to contact us, we're
sure that any of your feedback will receive our careful attentions and prompt reply.