|Color:||Red,gray,yellow||Running Speed:||1.5sec-6sec Speed Adjustable|
|Driving Method:||Dc Brushless Motor||Brand:||-40℃~+80℃|
|Name:||Vehicle Barrier Gate||Arm Type:||Straight,or Fence,folding|
RFID Vehicle Access Control Gates,
24V DC Motor Car Park Entry Barriers,
Pedestrian Vehicle Access Control Barriers
Vehicle Access Control Gates 24V DC Motor Speed Adjustale Vehicle Barrier Gate
|Arm type||Arm Length(L)||Operation time(S)||Height between arm and ground (M)|
|Straight arm||6m≥L>5m||5S||H=0.83m, height of arm center from ground level|
|Two fence arm||5m≥L≥4m||6S||H=0.9m,height of arm center from ground level|
|Three fence arm||5m≥L≥4m||6S||H=1.5m,height of arm center from ground level|
3.1 The running speed can be adjusted from 1.5s to 8s
3.2 Can be quickly interchanged
3.3 Open the barrier gate by motor wheel when power off ,automatically reset after power on
3.4 Curved crank arm three- link movement structure, the operation is stable
3.5 Wireless remote control control open/close
3.6 Auto reverse function(force adjustable)
3.7 Infrared photocells connector is available
3.8 Loop detector connector is available.
3.9 Well-integrated with car parking system equipment,with wire control(must be switch signal)
4.1 Working temperature(motor): -35℃~+85℃
4.2 Rated voltage:DC24V
4.3 Running speed:1.5s-8s
4.4 Rated current:8.58A
4.5 Rated power:160W
4.6 No-load speed:1850rpm
4.7 Rated speed:1400rpm
4.8 Output Power:56.8N.m
4.9 Relative humidity:≤90%
4.10 Remote control distance:≤100M(in the open place)
4.11 IP Degree:IP44
4.12 Max length of arm:6M
5. Barrier arm balance adjustment
1,Please check and confirm arm status in horizon and vertical position,then
tighten 2pcs M12 screw.
2,According to arm balance status, repeat adjusting the spring level of tightness
of M8*140MM, make sure the arm open and close in stable.
3,For the barrier gate with double springs,please adjust the two springs simultaneously.
4,If arm open and close shake too much, Please check below picture. Open arm
shaking a lot means spring is too tight, loose a little. Close arm shaking too much means
spring too lose, repeat tighten a little spring.
Wonsun is a professional manufaturer for barrier gate, boom barrier, sliding gate motor. If any interest, please contact me freely.
Whatsapp: +86 185 0748 1610
Intearking Barrier Gate 6m Arm with DC24V Brushless Motor For Parking lot SYSTEM
Contact Person: Keira Xia