Payment & Shipping Terms:
|Name:||Inverter Motor Toll Barrier Gate 1s CE Certificate For Highway Road||Power Supply:||AC220V|
|Arm Thickness:||Aluminum 1.5mm||MTTR:||<0.5Hrs|
Inverter Motor Toll Barrier Gate 1s CE Certificate For Highway Road
1.The arm direction can be quickly interchanged
2.Open the barrier gate by motor wheel when power off and automatic locking when power on.
3.Balance boom running with a motor transmission of cranks and shafts.
4.Remote control to operate the barrier gate.
5.Auto-reverse when the boom meets obstruction.
6.Infrared photocells connector is available.
7.Loop detector connector is available.
8.Well-intergrated with car parking system equipment,with wire control(must be switch signal).
9.Connector for traffic light(AC220V,power less than 40W)
10.Offering dry contact signal for car parking system(COM,NC,NO)
11.Auto-delay when closing(adjustable)
1 Working temperature(motor): -35℃~+85℃
2 Working temperature(control panel): -35℃~+85℃
3 Voltage:220V±10%,50HZ or 110V±10%,60HZ
4 Rated Power:80W,capacitor:9+uF/450W
6 Distance of remote control:100M＞L≥30M in the open place
Selection of spring.
|Spring type||Diameter||Spring Length|
1)Keep the barrier gate clean.
2)Check the joints every month in case of any loose parts.
3)Check the spring elasticity after barrier gate running 30,000times
4)Check the easily worn-out parts(like spring,limit switch)every half year and renew it.
5)Remote control distance will be shortened or not work in cases like big object screening, battery run out.extreme weathers.
2. Why does the controller panel operate with "Di Di Di" abnormal noises?
3. Why does the barrier finish half operation of opening and closing?
4. When barrier closed, why is there a 5 degree angle of inclination?
5. When barrier finish open, but it closes itself without any order control, what's the problem?
6. Why does the arm wave a lot when opening and closing?
7. Rubber linning installation suggestion:
8. Can you accept OEM/ODM order?