|Name:||Free Maintenance OEM Automatic Parking System Parking Barrier Gate 1.5s,3s,6s||Color:||Black,red,blue,white|
|Voltage:||220V±10%, 110V±10%, 50/60HZ||Rated Power:||80W|
security boom gate,
boom barrier gate
OEM Automatic Parking Barrier Gate System 1.5s 3s 6s Free Maintenance
Easy installation and maintenance reduces your labor cost
Simple structure and no limit switch design ensures easy installation and maintenance which reduces your labor cost
Heavy-duty and simple-design housing
The housing adopts 2mm precise machining cold-rolled plate and static electricity sprayed anti-UV surface which is non-scale and unfading in 5 years, conformed to the IP54 dustproof and waterproof, Simple design also decorates your premises
Anti-collision protects boom arm (optional)
Anti-collision mechanism will protects the boom arm not to be damaged once boom arm was collided by a vehicle.
Safety--- Anti-hit by Loop Detector (Optional)
While barrier boom moving down, If a coming vehicle was detected to be existing on the ground induction coil, the arm will go back to vertical position immediately until loop input was dismissed and then the arm will go down immediately.
Safety--- Anti-hit by IR photocell (Optional)
While arm moving down, If infrared transportation between transmitter and receiver is blocked by human or vehicle, the arm will go back to vertical position immediately. The arm will automatically close once the infrared transportation recovers.
Automatically close after the given time
Once this function is set “ON”, the barrier will automatically close after given time (1-90 seconds adjustable) if there is no vehicle passed after barrier open.
Automatically Close by loop detector (Optional)
If loop detector is installed, after vehicle passed the barrier will automatically close once the loop input was triggered
Automatically open by loop detector (Optional)
If loop detector is installed, when barrier boom is in horizontal position, the barrier boom will go up immediately once the loop input was triggered
Manually control in case of no power
Once power is off, just open the cabinet and manually control the barrier by a gear mechanism. Also barrier boom can be manually locked in any position between horizontal and vertical, the lock status will remain until unlock manually
|Voltage||220V±10%, 110V±10%, 50/60HZ|
|Remote control distance||≥30m|
|Max boom length||5meters|
|Remote Control||100m in the open place|
Arm position adjustment.
2)First please set the arm horizontally and vertically through regulating nut to leangthen or shorten the connecting rod, and then tighten M12 safety nuts.
2)To make the arm well balanced, please adjust the M8*140MM spring regulating screw accordingly.
3)For barrier agte with double springs, please adjust the springs simultaneously.
Motor Speed and Boom Type:
|Boom type||Boom Length(M)||Opening time(S)||Height between boom and ground(M)|
1)Keep the barrier gate clean.
2)Check the joints every month in case of any loose parts.
3)Check the spring elasticity after barrier gate running 30,000times
4)Check the easily worn-out parts(like spring,limit switch)every half year and renew it.
5)Remote control distance will be shortened or not work in cases like big object screening, battery run out.extreme weathers.
Selection of spring.
|Spring type||Diameter||Spring Length|
2. Why does the controller panel operate with "Di Di Di" abnormal noises?
3. Why does the barrier finish half operation of opening and closing?
4. When barrier closed, why is there a 5 degree angle of inclination?
5. When barrier finish open, but it closes itself without any order control, what's the problem?
6. Why does the arm wave a lot when opening and closing?
7. Rubber linning installation suggestion:
8. Can you accept OEM/ODM order?
Contact us for pricelist and catalog:
Contact Person: Sarah Lee