|Name:||High Quality Barrier Gate Operator With AC Reliable Electro-Mechanical Drive.||Housing Material:||2mm Cold Roller Steel Plate|
|Remote Control Distance:||Usually More Than 30 Meters, If There Is Less Obstacles, Even 50 Meters Or More||Relative Humidity:||< 90 %|
|Arm Speed:||0.6s.1s.1.8s.3s.6s.8s||Place Of Original:||Shenzhen,China|
driveway barrier gates,
electronic barrier gates
80W arm automatic barrier gate Operator With AC Reliable Electro Mechanical Drive
|Movement work temperature||35°C~80°C|
|Motor no-load speed||480 rate|
|Insulation grade||B class|
|Brake lever center from the ground level||850MM|
|Weight of barrier||50KG|
|Barrier size||335 * 335 * 935 mm (L*W*H)|
|Open method||Read card, remote control ,manual button and Bluetooth
• Anti crash device.
• Security at the entry as well as exit points.
• The limit switches for slowdown during both opening and closing can be adjusted both mechanically and
• Reliable electro-mechanical drive.
• Robust power transmission.
• Damping into open and closed position.
• Adjustable clutch.
• Pole of strong light alloy.
• Complete unit ready for connection.
• Pole stand of steel.
• Long term corrosion protection.
|Mechanical temperature||-40° to 75 C|
|Electrical temperature||-10° to 75 C|
|Power supply input||220V ± 10% AC, 50/60Hz|
|Power consumption||80 watt - 1.25A @ 240V|
|Relative humidity||< 90 %|
|Arm speed||0.6.1 , 1.8, 3 , 6 second|
|Max starting torque||Max torque : 1 second : 1.4±0.2 N.M | 3 / 6 second : 2.1 ± 0.1 N.M|
|AC rotation speed||AC rotation speed :1 second : 900 ± 50 RPM |3/6 second : 460 ± 40 RPM|
|Intelligent. Advanced smart motor control system is combined with unique lever design to achieve swift arm movement that reduces bouncing at end position.|
|motor uses lowest possible rotation speed (RPM) with our force rotation ratio technology to achieve high speed opening. This reduces mechanical wear and effectively eliminates any maintenance servicing on the motor.|
|Improved air ventilation. New fan design located at top instead of sideways. This allowed cool air enter from bottom and exit from top to achieve more efficient cooling this enabling to support higher flow of traffic.|
|Safe. Arm will auto-reverse when hitting an obstacle during closing. Photo beam can be added to autoreverse the arm ahead of time before hitting approaching vehicle or human. Arm will swing out during direct collision from front avoid arm frequently broken . Traffic light (red & green) can be added to indicate permission to pass through and further enhance safety usage. Built-in MCB to protect against any electric hazard.|
|Heavy Duty. eliminates the use of mechanical limit switch thus reducing mechanical wear and tear. Innovative counter weight spring design avoids possibility of motor over-stressed and break due to high volume continuous open/close cycle. All these allow to work harder and work longer for you.|
|Fast speed. 0.8 sec fast opening / closing speed allow more car to pass through faster thus effectively reducing congestion during peak hours.|
|User Friendly. In the event of power failure, arm can be easily lifted up by insert a key from outside to unlock the clutch. There is no need to open up entire casing to avoid any vandalism attempt of internal parts.|
|Easy maintenance. Epoxy powder paint will keep the unit looking clean and new for years. Damaged barrier arm can be replaced easily. AC based motor is stronger and maintenance free (no need to change carbon).|
Built in spring mechanism to counter balance arm’s weight allow for effortless motor drive and longer mechanical life span.
Control panel Consist of advance intelligent microprocessor based board and transformer housed in a weather resistant plastic casing. It controls the operation of the barrier system.
A)Support 4 types of speed – 1 ,1.8, 3 , and 6 second
B)Support separate push button for opening , closing and stop
C)Support motor encoder sensor
D)Support traffic light (red – green) output AC230
E)Optical slot sensor to control up and down limit
Casing is made from weather proof ABS plastic.
Casing dimension: 211mm x 95mm x 118mm
1 pcs Gate Barrier
1.Professional staff answer your questions in English.
2.Customized design and OEM/ODM.
3.Supported by our professional engineers.
4.Special discount of our distributors or agents in their area.
5. Welcome you to visit our factory.
Contact Person: Sarah Lee